Tektronix BSA85C Quick Start User Manual page 10

Important safety information
Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of that terminal.
The measuring terminals on this product are not rated for connection to mains or Category II, III, or IV circuits.
Do not operate without covers.
Hazardous voltage exposure is possible.
Avoid exposed circuitry.
Do not operate with suspected failures.
qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged or operates incorrectly. If in doubt about safety of
the product, turn it off and disconnect the power cord. Clearly mark the product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace when damaged. Do not
use probes or test leads if they are damaged, if there is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Use proper fuse.
Wear eye protection.
Do not operate in wet/damp conditions.
warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation.
so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do not push objects
into any of the openings.
Provide a safe working environment.
and indicators.
Avoid improper or prolonged use of keyboards, pointers, and button pads. Improper or prolonged keyboard or pointer use
may result in serious injury.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional to avoid stress
injuries.
Use care when lifting and carrying the product. This product is provided with handles for lifting and carrying.
iv
Do not operate this product with covers or panels removed, or with the case open.
Do not touch exposed connections and components when power is present.
If you suspect that there is damage to this product, have it inspected by
Use only the fuse type and rating specified for this product.
Wear eye protection if exposure to high-intensity rays or laser radiation exists.
Be aware that condensation may occur if a unit is moved from a cold to a
Remove the input signals before you clean the product.
Refer to the installation instructions in the manual for details on installing the product
Always place the product in a location convenient for viewing the display
Tektronix BERTScope Bit Error Rate Analyzers Quick Start User Manual