Danfoss DSH090 Application Manual page 35

Scroll compressors, DSH090 to DSH600 | Mechanical connections
Composition Cp1 + Cp2
Trio model
+Cp3
DSH1455T DSH485+DSH485+DSH485
DSH1570T DSH485+DSH485+DSH600
DSH1685T DSH485+DSH600+DSH600
DSH1800T DSH600+DSH600+DSH600
Oil equalization design DSH180E to DSH368E
The oil level is balanced by a pipe of 1"1/8 oil equalization line.
In order ensure best oil balance, the organ pipe need to be mounted inside the oil equalization port as indicated on
below picture. To connect the equalization line on rotolock connections, the organ pipe adaptor and teflon gasket
are included in the tandem kit must be used.
CC-000034
The organ pipe needs to be installed in the direction indicated by the label attached on pipe surface, which will
ensure best oil balance.
Oil equalization design DSH360X-424X-456X-479X-565X
The oil level is balanced by a pipe of 1"3/8 oil equalization line.
In order to ensure best oil balance, the organ pipe need to be mounted inside the DSH120, 161 or 184 oil
equalization port as indicated on below picture. DSH240, 295 or 381 has integrated organ pipe inside the oil
equalization port.
© Danfoss | Climate Solutions | 2022.10
Dis‐ Oil equaliza‐
Suction
charge
3"1/8 2" 1/8
3"1/8 2" 1/8
3"1/8 2" 1/8
3"1/8 2" 1/8
1 2
Outline
Suction
drawing
tion from
number
Left
1" 5/8 8556216
Right
Left
1" 5/8 8556246
Right
Left
1" 5/8 8556245
Right
Left
1" 5/8 8556244
Right
1 Organ pipe
2 Tightening torque 100Nm
Supplied with the compressor
Included in tandem kit
Washer inner di‐ Washer in
ameter suction of
33 mm(1.3 inch) Cp2 & Cp3
33 mm(1.3 inch) Cp2 & Cp3
36mm(1.42 inch) Cp3
36mm(1.42 inch) Cp3
42mm (1.65 inch) Cp2
41mm (1.61 inch) Cp3
Not needed -
AB288965961751en-001402 | 35
Trio kit code
120Z0793
120Z0822
120Z0822
120Z0819
120Z0820
120Z0712