Danfoss DSF090 Instructions

Instructions
Danfoss scroll compressors
DSF 090-200
Installation and servicing of the compressor by qualified personnel only. Follow these instructions and sound refrigeration engineering
practice relating to installation, commissioning, maintenance and service.
3 - Operating map
70
65
60
55
DSF155/175/200
50
45
DSF 130
40
35
30
25
20
15
10
5
0
-35 -30
The compressor must only be used for its
designed purpose(s) and within its scope of
application (refer to «operating limits»).
Consult Application guidelines and datasheet
available from cc.danfoss.com
© Danfoss | DCS (CC) | 2020.07
1 – Introduction
These instructions pertain to the Danfoss scroll compressors DSF scroll compressors used for air-condi-
tioning systems. They provide necessary information regarding safety and proper usage of this pro-
duct.
2- Nameplate
A
B
C
DSF Operating map (SH 5K)
-25 -20 -15 -10
Evaporating temperature (°C)
Under all circumstances,
the EN378 (or
applicable local
regulation) requirements
must be fulfilled.
Òu*=Í4P01C Ó
A: Model number
B: Serial number
C: Refrigerant
D D: Supply voltage, Starting current & Maximum
E: Housing service pressure
E
F: Factory charged lubricant
F
DSF090/100/115
-5 0 5
10
The compressor is delivered under
nitrogen gas pressure (between 0.3 and
other
0.7 bar) and hence cannot be connected
safety
as is; refer to the «assembly» section for
further details.
8510294P01C - AN323020831102en-000101 | 1
operating current
15 20 25 30
The compressor must be
handled with caution in the
vertical position (maximum
offset from the vertical : 15°)