Table of Contents
Advertisement
Carry out basic settings (Setting menu)
You can make the following basic settings under Setting:
•
Laser On
•
Trigger
•
Line Length
•
Reset All
Setting
Laser On
Laser On
Exit
To allow mechanical alignment of the sensor, the laser can be switched on us-
ing the <OK> key in the menu item "Laser On".
Switching-off is carried out automatically when leaving the menu using <OK>.
SIMATIC MV230
Operating Instructions, 01/2007 Edition, A5E00749101-01
Start-up
17
Advertisement
Table of Contents
