Table of Contents
Advertisement
Ending Traffic Announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the announcement
prematurely, press TA or TRAFFIC during
the announcement.
Note: If you press TA or TRAFFIC at any
other time it will switch all announcements
off.
Automatic Volume Control
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
1.
Press the MENU button.
2. Select AUDIO or AUDIO SETTINGS.
3. Select AVC LEVEL or ADAPTIVE
VOL.
4. Use the left or right arrow button to
adjust the setting.
5. Press the OK button to confirm your
selection.
6. Press the MENU button to return.
Digital Signal Processing
Digital Signal Processing Occupancy
This feature takes into account the
differences in distance from the various
speakers in your vehicle to each seat. You
must select the correct sitting position for
the audio to be correctly set.
Digital Signal Processing Equalizer
Select the music category that most suits
your listening preference. The audio output
will change to enhance the particular style
of music chosen.
Changing the Digital Signal Processing
Settings
1.
Press the MENU button.
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Audio System
2. Select AUDIO or AUDIO SETTINGS.
3. Scroll to the required digital signal
processing function.
4. Press the OK button.
5. Use the up and down arrow buttons to
select the required setting.
6. Press the OK button to confirm your
selection.
7.
Press the MENU button to return.
News Broadcasts
Your audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband, radio data
system or other enhanced network linked
stations.
The display will indicate there is an
incoming announcement, during news
broadcasts. When the audio unit interrupts
for a news broadcast the preset volume
level will be the same as traffic
announcements.
1.
Press the MENU button.
2. Select AUDIO or AUDIO SETTINGS.
3. Scroll to NEWS and turn on or off with
the OK button.
4. Press the MENU button to return.
Alternative Frequencies
The majority of programs that broadcast
on the FM waveband have a program
identification code, it can be recognized by
audio units.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function will search for the
strongest station signal.
Under certain conditions, however,
alternative frequencies tuning may
temporarily disrupt normal reception.
184
Advertisement
Table of Contents
