Table of Contents
Advertisement
WINDSHIELD WIPERS
Note: Fully defrost the windshield before
you switch the windshield wipers on.
Note: Make sure you switch the windshield
wipers off before entering a car wash.
Note: If you use a car wash with a waxing
cycle, make sure that you remove the wax
from the windshield and the wiper blades.
Note: If streaks or smears appear on the
windshield, clean the windshield and the
wiper blades. See Checking the Wiper
Blades (page 131).
If that does not resolve the issue, install new
wiper blades. See Changing the Front
Wiper Blades (page 131).
Note: Do not operate the wipers on a dry
windshield. This may scratch the glass,
damage the wiper blades or cause the wiper
motor to burn out. Always use the
windshield washers before wiping a dry
windshield.
E102032
A
Single wipe
B
Intermittent wipe
C
Normal wipe
D
High speed wipe
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Wipers and Washers
Note: If you press and hold the wiper lever
in position A, the wipers will continue to
wipe until you release the wiper lever.
Intermittent Wipe
E102033
Use the rotary control to adjust the
D
intermittent wipe interval.
C
Speed Dependent Wipers
When your vehicle speed increases, the
B
interval between wipes decreases.
AUTOWIPERS
Note: Fully defrost the windshield before
you switch the windshield wipers on.
Note: Make sure you switch the windshield
wipers off before entering a car wash.
A
Note: If streaks or smears appear on the
windshield, clean the windshield and the
wiper blades.
If that does not resolve the issue, install new
wiper blades.
42
A
Short wipe interval
B
Intermittent wipe
C
Long wipe interval
(If Equipped)
A
B
C
(If Equipped)
Advertisement
Table of Contents
