Table of Contents
Advertisement
Starting and Stopping the Engine
Starting the Engine
Turn the key to position III. Release the
key when the engine starts.
KEYLESS STARTING
WARNINGS
The system may not function if the
key is close to metal objects or
electronic devices such as cell
phones.
Always check that the steering wheel
lock is deactivated before
attempting to move your vehicle.
Note: The ignition will automatically switch
off when you leave your vehicle unattended.
This is to prevent your vehicle battery
running out of charge.
Note: A valid key must be located inside
your vehicle to switch the ignition on and
start the engine.
Ignition On
Press the button once. It is located on the
instrument panel near the steering wheel.
All electrical circuits and accessories are
operational and the warning lamps and
indicators will illuminate.
E160172
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Starting With Manual
Transmission
Note: Releasing the clutch pedal while the
engine is starting will stop the engine
cranking and return to ignition on.
(If Equipped)
1.
2. Briefly press the button.
Starting With Automatic
Transmission
Note: Releasing the brake pedal while the
engine is starting will stop the engine
cranking and return to ignition on.
1.
2. Fully depress the brake pedal.
3. Briefly press the button.
Starting a Diesel Engine
Note: Engine cranking will not commence
until the engine glow plug indicator has
extinguished. This may take several seconds
in extremely cold conditions.
Failure to Start
All Vehicles
The system will not function if:
•
•
If you are unable to start your vehicle, do
the following.
80
Fully depress the clutch pedal.
Move the transmission selector lever
to position P or N.
The key frequencies are jammed.
The key battery has no charge.
Advertisement
Table of Contents
