ABB CoreSense M10 User Manual page 75

ID ED Description
Ct13 1,2 Which origin categories are supported
Ct14 1,2 What happens if the orCat value is not supported or
invalid
Ct15 1,2 does the ied accept a SelectWithValue / Operate with
the same control value as the current status value
is this behavior configurable
Ct16 1 does the ied accept a select/operate on the same
control object from 2 different clients at the same time
Ct17 1 does the ied accept a Select/SelectWithValue from the
same client when the control object is already selected
(Tissue #334)
Ct18 1,2 is for SBOes the internal validation performed during
the SelectWithValue and/or Operate step
Ct19 - Can a control operation be blocked by Mod=Off or
[On-]Blocked (Compare pixiT-Sr5)
Ct20 1,2 does the ied support local / remote operation
Ct21 1,2 does the ied send an informationReport with
LastApplerror as part of the Operate response- for
control with normal security
Ct22 2 How to force a "parameter-change-in-execution"
Ct23 1,2 Can a controllable object be forced to keep its old
state e.g. internal Controllable Objects may not be
accessible to force this, whereas a switch like Circuit
Breaker outside the dUT can?
Ct24 1,2 When CdC=dpC is supported, is it possible to have
dpC (Controllable double point) go to the intermediate
state? (00)
Ct25 1,2 do any objects have Operate Timeout > 0
Value/Clarification
bay-control
station-control
remote-control
automatic-bay
automatic-station
automatic-remote
maintenance
process
dOns
SBOns
dOes
SBOes
dOns
SBOns
dOes
SBOes
Configurable
dOns
SBOns
dOes
SBOes
SBOns
SBOes
not applicable
deprecated
not applicable
SBOns
dOns
SBOns
SBOes
not applicable
not applicable
dOes
SBOes
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
IEC 61850 C71