Toggling Validation Of The Golden Reference Spectrum - ABB CoreSense M10 User Manual

Toggling validation of the golden reference spectrum

There are times when you will need to change the validation status of the golden spectrum reference.
To do so:
1 Click FGS misc from the Maintenance page. The FGS misc page appears (see Figure 70 below).
—
Figure 70 The FGS misc page
2 Toggle the Enabled box in the Golden spectrum reference validation section to change the validation
status.
3 Click Apply. From now on, the golden spectrum reference will be validated (or not, if you just so decided).
D100 User Guide