Load Bios Default - MSI MS-7101 Instruction Manual

generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves.
If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability
and performance. But if you are plagued by EMI, select the desired range for EMI reduction.
Remember to disable Spread Spectrum function if you are overclocking, because even a slight
jitter can introduce a temporary boost in clock speed which may just cause your overclocked
processor to lock up.
CPU Clock
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and overclock
the processor by adjusting the FSB clock to a higher frequency. Setting options:
For CPU
For CPU

Load BIOS Default

You can load the BIOS default values provided by the mainboard manufacturer for the stable
performance.
For the complete BIOS introduction and setup, please visit MSI website at
http://www.msi.com.tw.
FSB200: [200]~[500]
FSB133: [133]~[500]
14