MSI MS-7043 User Manual page 57

Wake-Up Key
This setting only works When Wake Up By Keyboard From S3 is set
to [Enabled]. This setting specifies how the system will be awakened
from power saving mode when input signal of the keyboard is detected.
Setting options: [Any Key], [Specific Key].
Wake-Up Password
This setting specifies the keyboard wake-up Password and works
only when the Wake-Up Key setting is set to [Specific Key].
Resume On PS/2 Mouse From S3
The setting determines whether the system will be awakened from the S3
power saving mode when input signal of the PS/2 mouse is detected. Setting
options: [Enabled], [Disabled].
Wake Up On PME#
When setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PME (Power Manage-
ment Event). Setting options: [Enabled], [Disabled].
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Enabled],
[Disabled].
Alarm Date/Hour/Minute/Second
If Resume On RTC Alarm is set to [Enabled], the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59
BIOS Setup
3-17