MSI MS-7043 User Manual page 56

MS-7043 ATX Mainboard
the VGA card. Therefore, if the AGP driver of the card does not support the initializa-
tion feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (Minute)
If system activity is not detected for the length of time specified in this field, all devices
except CPU will be shut off. Settings: [Disabled], [1 Min], [2 Min], [4 Min], [8 Min], [10
Min], [20 Min], [30 Min], [40 Min], [50 Min], [60 Min].
Power Button Function
This feature sets the function of the power button. Settings are:
[Power Off]
[Suspend]
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Last State]
Set Wake Up Events
Press <Enter> and the following sub-menu appears.
USB Wake-Up from S3
This item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Settings: [Enabled], [Disabled].
Wake Up By Keyboard From S3
The item specifies how the system will be awakened from power saving
mode when input signal of the keyboard is detected. Settings: [Enabled],
[Disabled].
3-16
The power button functions as normal power off button.
When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.