Connectors; Floppy Disk Drive Connector: Fdd1; Sys_Fan1 Sys_Fan2 - MSI MS-7036 User Manual

MS-7036 M-ATX Mainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
and USB Ports.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: PWR_FAN1 / CPU_FAN1 /
CPU_FAN2 (optional) / SYS_FAN1 / SYS_FAN2 (optional)
The CPU_FAN1/CPU_FAN2 (processor fan), SYS_FAN1/SYS_FAN2(system
fan) and PWRFAN1 (power fan) support system cooling fan with +12V. It supports
three-pin head connector. When connecting the wire to the connectors, always take
note that the red wire is the positive and should be connected to the +12V, the black
wire is Ground and should be connected to GND. If the mainboard has a System
Hardware Monitor chipset on-board, you must use a specially designed fan with
speed sensor to take advantage of the CPU fan control.
GND
+12V
Sensor
PWR_FAN1
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPU_FAN1 CPU_FAN2 supports fan control. Fan/heatsink with 3
or 4 pins are both available.
3. Be sure to configure the CPU FAN PIN Select in BIOS for the
CPU Fan you are using .
4. Please refer to the recommended CPU fans at Intel
website.
2-14

Connectors

GND
+12V
Sensor
CPU_FAN2
CPU_FAN1
(optional)
FDD1
GND
GND
+12V
+12V
Sensor
Sensor
GPIO
SYS_FAN1
GND
+12V
Sensor
GPIO
SYS_FAN2
(optional)
® official