MSI MS-7036 User Manual page 57

M-atx mainboard
Table of Contents

Advertisement

MS7036 M-ATX Mainboard
HDD Power Down
If HDD activity is not detected for the length of time specified in this field, the hard disk
drive will be powered down while all other devices remain active. Settings are [Disabled]
and [1] through [15] Min.
Soft-Off by PWR-BTTN
When Enabled, turning the system off with the on/off button places the system in a
very low-power-usage state, with only enough circuitry receiving power to detect
power button activity or Resume by Ring activity.
CPU THRM-Throttling
The item allows you to specify the CPU speed (at percentage) to which it will slow
down when the CPU reaches the predetermined overheat temperature. Settings
range from [25.0%] to [50.0%] at [75.0%] increment.
Wake-Up by PCI card
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or compo-
nent is detected. Options: [Enabled], [Disabled].
Power On by Ring, USB KB Wakeup From S3
These fields specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected. Setting options: [Enabled], [Disabled].
Resume By Alarm
The field is used to enable or disable the function of Resume By Alarm. Setting options:
[Disabled], [Enabled].
Date (of Month) Alarm
When Resume By Alarm is set to Enabled, the field specifies the date for Resume By
Alarm. Setting options: [0]~[31].
Time (hh:mm:ss) Alarm
When Resume By Alarm is set to Enabled, the field specifies the time for Resume By
Alarm. Format is <hour><minute><second>.
** Reload Global Timer Events **
Primary/Secondary IDE 0/1, FDD/COM/LPT Ports, PCI PIRQ [A-D]#
The global timer is the hardware timer that counts down to the power saving modes. If
the monitoring of the listed hardware peripherals or components is enabled, the activity
of the specified peripherals or components will awaken the system or reload the
original count of global timer when they are accessed. Setting options: [Disabled],
[Enabled]
3-22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents