Beko BEEPI 090 User Manual page 8

1 Safety Precautions
disconnection device which
has at least 3mm clearances
in all poles, and have a leakage
current that may exceed 10mA,
the residual current device
(RCD) having a rated residual
operating current not exceeding
30mA, and disconnection must
be incorporated in the fixed
wiring in accordance with the
wiring rules.
Take note of fuse
specifications
The air conditioner's circuit board
(PCB) is designed with a fuse to
provide overcurrent protection.
The specifications of the fuse are
printed on the circuit board, such
as:
T3.15AL/250VAC, T5AL/250VAC,
T3.15A/250VAC, T5A/250VAC,
T20A/250VAC,
etc.
Note: For the units using R32
C
or R290 refrigerant, only the
blast-proof ceramic fuse can
be used.
8 / 116 EN
T30A/250VAC,
Warnings for product
installation
1. Installation
performed by an authorized
dealer or specialist. Defective
installation can cause water
leakage, electrical shock, or
fire.
2. Installation must be performed
according to the installation
instructions.
installation can cause water
leakage, electrical shock, or
fire.
3. Contact an authorized service
technician for repair or
maintenance of this unit. This
appliance shall be installed
in accordance with national
wiring regulations.
4. Only use the included
accessories, parts, and
specified parts for installation.
Using non-standard parts
can cause water leakage,
electrical shock, fire, and can
cause the unit to fail.
Split Type Air Conditioner / User Manual
must be
Improper