2. Attach the Wi-Fi antennas
The R500-PLTE router includes two Wi-Fi (stick) antennas. Attach the antennas to the ports
marked 2.4/5GHz, as shown below.
•
Hold the antenna straight and twist the base to thread onto the connector.
Tighten with fingers only. Do not over-tighten.
•
•
Once the router is mounted and powered on, angle the antennas for optimal signal
reception.
3. Finding Wi-Fi Name and Password
On bottom of the Cradlepoint unit
•
Wi-Fi Name (SSID) highlight in yellow
•
Wi-Fi Password (Default Password serial)
•
top of the unit highlight in yellow
Connect to Wireless Network
Open the Wi-Fi application on device that you want to connect to your Cradlepoint
•
hotspot. Then find SSID Wi-Fi name.
Click on connect and enter password when prompted.
•
•
Open your browser and you are good to go.