Hayes Keyboard Dialing Commands - Northern Telecom Meridian M3000 Reference Manual

Table 9-3xxx
Hayes keyboard dialing parameter registers
Register
S52
S53
S54

Hayes keyboard dialing commands

Table 9-4 provides a complete list of Hayes commands supported by the
TADO.
Note: If the commands are input without a numerical parameter, it is
assumed to be 0. For example, user input of ATE is interpreted as ATE0,
which disables the echoing of the keyboard dialing commands.
Table 9-4xxx
Hayes keyboard dialing commands
Heading
A/
A
AT (CR)
D
E0
E1
H0
Meridian 1 Options 201, 211 Meridian SL-100 M3000 Touchphone Reference Manual MSL03
User Input
Any valid ASCII code
Any valid ASCII code
Any valid ASCII code
Heading
Re-execute previous command line; not preceded with the letters AT nor
followed by a carriage return.
Go into answer mode; and attempt to go into the on-line state.
Command line syntax
Go into originate mode; dial number that follows; and attempt to go into
the on-line state.
Disable character echo in the command state.
Enable character echo in the command state (default setting).
Go on-hook.
Keyboard dialing 9-15
(continued)
Description
Default
39 Most significant product
code character
36 Middle character of product
code
30 Least significant product
code character
-end-
-continued-