Advertisement
Quick Links
Advertisement
Related Manuals for Speco O4VD1N
Summary of Contents for Speco O4VD1N
- Page 1 Quick Start Guide O4VT1N...
- Page 2 This owner's manual is designed to be a reference tool for your system. Please read this manual carefully before operating the unit and retain it for future reference. Should you require any technical assistance, contact Speco Technologies Tech Support at 1-800-645-5516 Important Safeguards and Warning 1.
- Page 3 Technologies reserves the right to modify these without notice and without incurring any obligation. Speco Technologies is not liable for any loss caused by improper operation. Note: Before installation, check the package and make sure that all components are included.
- Page 4 Camera Quick start guide Drill template screws (PA 4 ×25mm) 3 Plastic screw Screwdriver anchors Overview Overview Ethernet connector Audio input connector Power connector Mounting base Fixed screw Microphone Micro SD card slot Reset...
-
Page 5: Connecting Network Cable
External microphone DC12V * 1 It is recommended to install the water-proof connector for outdoor installations. * 2 DC 12V power supply is not required if a PoE switch or injector is used to power the camera. ► Connecting Network Cable ①... -
Page 6: Installation
Installation * Before you start, please make sure that the wall or ceiling is strong enough to withstand three times the weight of the camera. ① Attach the drill template of the camera to the place where you want to install the camera and then drill the screw hole and cab e hole on the wall according to the drill template. - Page 7 ③ Route and connect the cables. T hen secure the mounting base to the ceiling or wall with the screws provided. 3× ④ Install the camera unit and enclosure to the mounting base and then adjust if necessary to obtain an optimum view angle. Finally, fasten the camera with the fixed screw.
- Page 8 Web Operation and Login IP Scanner can search for the device on the local network. ● Operation ① Make sure that the camera and the PC are connected to the same local network. The camera is set to DHCP by default. ②...
- Page 9 The login interface is shown above. Default user name is admin and password is 1234. After logging in, follow directions to install applicable plugins.