Advertisement
Quick Links
Advertisement
Related Manuals for Speco O4VT1M
Summary of Contents for Speco O4VT1M
- Page 1 Quick Start Guide O4VT1M...
-
Page 2: Warning And Caution
Warning and Caution ■ If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. Any unauthorized changes or modifications could void the warranty. ■ Do not allow water or liquid intrusion into the camera. ■... - Page 3 Camera Quick start guide Drill template Screwdriver × 3 Tapping screw ×3 Rubber plug Junction box Plastic plug Overview Overview Ethernet connector Power connector Mounting base Fixed screw Microphone Micro SD card slot Reset...
-
Page 4: Connecting Network Cable
DC12V * 1 It is recommended to install the security cap for outdoor installations. * 2 DC 12V power supply is not required if a PoE switch or injector is used to power the camera. ► Connecting Network Cable ① Loosen the nut from the main element. ②... -
Page 5: Installation
Installation * Before you start, please make sure that the wall or ceiling is strong enough to withstand three times the weight of the camera and the junction box. ① Open the mounting base and the upper cover of the junction box. Mounting base Upper cover ②... - Page 6 ③ Unscrew the cover from the dome to insert the SD card. After that, install the cover back to the dome and fix it firmly with the screws. (Note that the cover should not be installed unevenly.) SD card slot cover Insert a micro SD card ④...
- Page 7 ⑥ Loosen the fixed screw to a djust the view angle of the camera. Before adjustment, preview the image of the camera on a monitor. After that, tighten the fixed screw to finish the installation. Fixed screw Web Operation and Login IP Scanner can search for the device on the local network.
- Page 8 ● Operation ① Make sure that the camera and the PC are connected to the same local network. The camera is set to DHCP by default. ② Install IP Scanner from the CD and run it after installation. O4DT1M ③ In the device list, you can view the IP address, model number, and MAC address of each device.