Using Multifunctional Buttons - BenQ S1420 Series User Manual

• Turn off the camera before removing the battery.
• Please fully charge the Li-ion battery before using it for the first time.
• When the battery is being charged, the status LED indicator flashes in green. When
the battery is fully charged, the status LED indicator is off.
• Use only the specified battery type. Using other types of battery may damage the
camera and invalidate the warranty.
• Ensure that the Li-ion battery is inserted into the product with correct polarity. Incorrect
polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to store
the camera for a long time.
• Damage caused by the use of an incorrect power adapter is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.

Using multifunctional buttons

You can choose camera settings by pressing the 4-way control or the
1. Left/Focus:
• Scrolls left in menus.
• Toggles between different focus modes.
2. Up:
• Scrolls up in menus.
• Turns on/off Face Tracking. See "Face Tracking" on page
11 for details.
• Rotates an image. See "Rotating an image" on page 32
for details.
3. Right/Flash:
• Scrolls right in menus.
• Selects a flash mode.
4. Down:
• Scrolls down in menus.
5. : Confirms a chosen setting.
Preparing the camera for use 5
button.