Preparing The Camera For Use; Using Multifunctional Buttons - BenQ C103 Series User Manual

Preparing the camera for use

Use only the specified batteries for the camera, and always turn off the camera before
removing the batteries.
A
B
C
D

Using multifunctional buttons

You can choose camera settings by pressing the 4-way control or the
1. Left/Focus:
• Scrolls left in menus.
• Toggles between different focus modes.
2. Up:
• Scrolls up in menus.
• Turns on/off Face Tracking. See "Face Tracking" on page
9 for details.
• Rotates an image. See "Rotating an image" on page 25
for details.
3. Right/Flash:
• Scrolls right in menus.
• Selects a flash mode.
4. Down:
• Scrolls down in menus.
5. : Confirms a chosen setting.
To install the batteries:
1. Open the battery cover (A).
2. Insert the batteries in the correct direction by
matching the + - label on the battery cover (B).
3. Push the batteries all the way down.
4. Close the battery cover (D).
To remove the batteries:
1. Open the battery cover.
2. Pull the batteries out (C).
3. Close the battery cover (D).
Preparing the camera for use 3
button.