Table of Contents
Advertisement
• Damage caused by the use of an incorrect battery charger set is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
• Remove the battery from the camera if you do not intend to use the camera for a long
time.
Using multifunctional buttons
You can choose camera settings by pressing the 4-way control or the
1. Left/Focus:
• Scrolls left in menus.
• Toggles between different focus modes.
2. Up:
• Scrolls up in menus.
• Turns on/off Face Tracking. See "Face Tracking" on page
10 for details.
• Rotates an image. See "Rotating an image" on page 25
for details.
3. Right/Flash:
• Scrolls right in menus.
• Selects a flash mode.
4. Down:
• Scrolls down in menus.
5.
: Confirms a chosen setting.
Using an SD card
The camera comes with internal memory for storing captured images, video clips, or audio
files. You can also add an SD card to store more files.
Before initial use of an SD card, please format the card first by pressing
Manage Memory >
To install an SD card:
1. Make sure the camera is turned off.
2. Open the memory card cover.
3. Insert an SD card in the correct direction.
4. Close the memory card cover.
To remove an SD card:
1. Make sure the camera is turned off.
2. Open the memory card cover.
3. Lightly press the edge of the memory card to eject.
4. Close the memory card cover.
/
>
Format >
Preparing the camera for use 5
> Yes.
button.
>
>
Advertisement
Table of Contents
