Page 1
S1410 Digital Camera User Manual Welcome...
Page 2
Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4
Safety warning and notice Before operating the camera, please make sure that you read and fully understand the content in this section. If you ignore and violate all safety warning notices indicated in this section, the camera warranty may be void. Meanwhile, not only the camera but also you and all other people and things around you may be severely damaged, injured, or even placed in danger of death.
• If the lens cannot retract into the camera, please replace the batteries first (usually this is because of drained batteries). Then the lens should retract automatically. If the lens still cannot retract, please contact your dealer. • Under no circumstances should you push the lens back manually as this may damage the camera. •...
Page 6
Do not hold the camera by excessive To avoid accidental falling, please attach force. Plus, be sure to protect the the hand strap to the camera and always camera from strong impacts. hold the camera by keeping the hand strap around your wrist. If the battery suddenly depleted and When the camera is not in use, always caused the lens fail to retract, please...
CONTENTS INTRODUCTION 26 Protecting Images Overview 27 DPOF Settings Package Contents 28 Erasing Images GETTING TO KNOW YOUR 29 MENU OPTIONS CAMERA 29 Capture Menu Front View 32 Video Menu Rear View 33 Playback Menu 10 LCD Monitor Display 35 Setup Menu 12 GETTING STARTED 37 TRANSFERRING FILES TO 12 Preparation...
INTRODUCTION Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with a 14.0-megapixel CCD, this camera is capable of capturing images with a resolution of up to 4288 x 3216 pixels. Package Contents Carefully unpack your camera and ensure that you have the following items: Common Product Components:...
GETTING TO KNOW YOUR CAMERA Front View 1. Flash 2. Shutter button 3. ON/OFF Power button 4. Self-timer LED 5. Microphone 6. Lens Rear View A. LCD monitor B. Status LED C. USB and AV OUT terminal D. Strap holder E.
LCD Monitor Display Capture mode 00214 00214 00214 1. Zoom status 2. Available number of shots 3. O.I.S. 4. Storage media Internal memory (no card) SD/SDHC memory card 5. Battery condition Full battery power Medium battery power Low battery power 2010.10.01 2010.10.01 2010.10.01...
Page 11
Video mode 1. Zoom status 2. Storage media 3. Battery condition 4. Focus setting 5. Flash off 6. Self-timer icon 7. Video resolution 8. Elapsed time / Available recording time 9. Main focus area 00:00:00 / 02:28:49 00:00:00 / 02:28:49 2010.10.01 2010.10.01 2010.10.01...
GETTING STARTED Preparation 1. Attach the camera strap. 2. Open the battery/memory card cover. 3. Insert the supplied battery with correct orientation as shown. (label side front) 4. Insert an SD/SDHC memory card (Optional). The camera has 32MB internal memory(23MB available for image storage), but you can load an SD/SDHC memory card to expand the camera’s memory capacity.
Initial Settings The language & date/time needs to be set if and when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the battery for an extended period of time. 1.
Choosing the Language Specify in which language menus and messages are to be displayed on the LCD monitor. 1. Press the button, and set the camera mode MODE to [ ] or [ ]; or press the 7 button. 2. Press the button.
CAPTURE MODE Capturing Images Your camera is equipped with a 2.7” full color TFT LCD monitor to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the button to turn the power on. ON/OFF 2. Press the button, and set the camera mode to [ MODE 3.
Setting the Scene Mode By simply selecting one of the available scene modes, you can capture the image with the most appropriate settings. 1. Press the button, and set the camera mode to [ ], and press the MODE button. 2.
Page 17
Scene mode Description Select this mode when you want to capture an image that makes Portrait Man a man stand out against a blurred background. Select this mode when you want to capture an image that makes Portrait Lady a lady stand out against a blurred background. Select this mode when you want to capture an image with infinity Landscape focus, hard sharpness and high saturation.
Taking Images with Intelligent Scene mode In this Intelligent Scene mode, the camera can sense the ambient conditions and automatically select the ideal shooting mode. 1. Press the button, and set the camera mode to [ ], and press the MODE button.
Taking and Combining Panoramic Pictures Pictures are manually shot, and the camera automatically combines pictures in the camera. 1. Press the button, and set the camera mode to [ ], and press the MODE button. 2. Select [Panorama PanCapture] with the buttons, and press the button.
Recording Shots into Multiple Image Layout The Album Shot mode enables you to easily record images and combine three shots into a single image. 1. Press the MODE button, and set the camera mode to [ 2. Press the MENU button, and select [Capture Md.] icon with the buttons.
Recording Shots using Face Detection Technology Face Detection Technology can identify and focus on the human faces in the image. 1. Press the button, and set the camera mode to [ MODE 2. Press the button, and select [ ] icon with the buttons.
VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 / 720p pixels. 1. Press the MODE button, and set the camera mode to [ 2. Compose the image. 3.
PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. 1. Press the 7 button. The last image appears on the screen. 2. The images can be displayed in forward or reverse sequence with the buttons.
Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. 1. Press the 7 button. The last image appears on the screen. 2. Select the image that you want to edit with the buttons.
Attaching Voice Memos A maximum of 30 seconds of audio can be recorded as a memo for captured still images. The voice memo can be recorded only once. 1. Press the 7 button. The last image appears on the screen. 2.
Protecting Images Set the data to read-only to prevent images from being erased by mistake. 1. Press the 7 button. The last image appears on the screen. 2. Select the image that you want to protect with the buttons. 3. Press the button.
DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer.
Erasing Images Erasing a single image / Erasing all images 1. Press the 7 button. The last image appears on the screen. 2. Select the image you want to erase with the buttons. 3. Press the button. MENU 4. Select [Delete] with the buttons, and press button.
MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. AUTO MENU MENU 1. Press the button to turn the power on. ON/OFF 2. Press the button, and set the camera mode to any scene mode. MODE 3.
Page 30
Color This sets the color of the image that will be captured. * Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple Saturation This sets the saturation of the image that will be captured. * High / Standard / Low Metering This sets the metering method for calculating the exposure.
Page 31
Quick Shot If this function is set to “On”, the camera takes a quick shot without focusing. * On / Off Digi. Zoom This sets whether or not to use digital zoom at the time of photography. * On / Off Find Blur Refer to the section in this manual titled “Find Blur”...
Video Menu This menu is for the basic settings to be used when recording video clips. MENU MENU 1. Press the button, and set the camera mode to [ MODE 2. Press the button to enter the [Video] menu. MENU 3.
Playback Menu In the [7] mode, choose which settings are to be used for playback. MENU MENU 1. Press the 7 button. 2. Press the button. MENU 3. Select the desired option item with the buttons, and press the button to enter its respective menu.
Page 34
Qual. Change Changes the quality (compression) of a recorded image. Compress images down to half of their size or less, overwrite old size images with newly compressed images. It is only possible to reduce the image quality/size, never to increase it. Copy to Card Allows you to copy your files from the camera’s internal memory to an SD/SDHC memory card.
Setup Menu Set your camera’s operating environment. MENU MENU 1. Press the button, and set the camera mode to [ ] or [ ]; or press the 7 MODE button. 2. Press the button. MENU 3. Select the [Setup] at the end of the Menu with the buttons, and press the button.
Page 36
Video Out This sets your camera to match the system of the equipment that you are going to connect to the camera. * NTSC / PAL Fr. No. Reset This creates a new folder. The captured images are recorded to the newly created folder from number 0001.
TRANSFERRING FILES TO YOUR COMPUTER System Requirement Windows Macintosh Pentium III 1GHz or equivalent PowerPC G3/G4/G5 Windows 7/XP/Vista OS 10.3.9 or later 512MB RAM 256MB RAM (512 MB recommended) 150MB available hard disk space 128MB available hard disk space CD-ROM drive CD-ROM drive Available USB port Available USB port...
EDITING SOFTWARE INSTALLATION Softwares are included on the CD-ROM: ArcSoft MediaImpression™ - Easily, creatively, and productively manage your multimedia files. Create your own movies or photo slide shows, and share your photo, video and music files easily through simple email attachments or popular photo printing and video sharing websites.
APPENDIX Possible Number of Shots Possible number of shots (still image) The table shows the approximate shots that you can capture at each setting based on the capacity of the internal memory and the SD/SDHC memory card. SD/SDHC memory card capacity Internal Size Quality...
Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. Connecting the camera to the printer 1. Connect one end of the USB cable to your camera.
Page 42
3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. Select the image that you want to print with the buttons. Select the print number (up to 99) with the buttons. After selecting the desired image and printing number, press the button to confirm.
Troubleshooting and service information If your camera cannot operate normally, see the frequently encountered problems and solutions listed below. If the problem persists, contact your nearest service center or technical support. Problem Cause Solution There is no battery or the battery is not inserted Insert the battery correctly.
PictBridge-compliant is powered off. and then select Printer. printers. Technical support For technical assistance, free driver updates, product information, and news releases, visit the following web site: http://www.BenQ.com EN-44...
Need help?
Do you have a question about the S1410 and is the answer not in the manual?
Questions and answers