Introduction to SiS964 SATA RAID
3. You will have two selections to create a RAID 1 array. The default value is <1>.
If you select <1>Auto Create, you can create a RAID 1 array faster and easier.
The result after creating will be shown on step 5. Besides, you also can select <2>
Manual Create, see following steps.
4. Use< > < > to select disk , and press <Enter> to select disk, <Q> to exit. When
you press <Enter> on the disk you wanted, the RAID Type will be changed from
Single to RAID 1. The same as RAID 0, the disk you select first will be the SOURCE
disk.
4-13