MSI 661FM2-V ILSR User Manual page 71

MS-7060 Micro ATX Mainboard
5. Use < > < > to select disk , and press <Enter> to select disk, <Q> to exit. When
you press <Enter> on the disk you wanted, the RAID Type will be changed from
Single to RAID 0. And the disk you select first will be the SOURCE disk.
6. Next, you will see a message "Split the SOURCE(Disk x) data to RAID disks?
". Press <N> and <Enter> to create RAID 0 array only or press <Y> and <Enter> to
split the data from source disk to other disks.
4-10