Check - Bosch 23-15-2055 Manual

7.5.5.2 Check

There is a different wear gauge for each chain,
depending on the manufacturer:
Figure 157: Example of a KMC gauge
Figure 158: Example of a SHIMANO gauge
Figure 159: Example of a SRAM gauge
Figure 160: Example of a ROHLOFF gauge
Figure 161: Example of a KMC digital gauge
MY23P01 - 22_1.0_21.10.2022
Cleaning, maintenance and inspection
1 Insert gauge between two chain links on the
right-hand side.
Figure 162: Gauge is inserted
2 Lower gauge down to the left-hand side.
Figure 163: Lower gauge to the left
 If the gauge does not fit between the links, the
chain is not worn yet.
Figure 164: Gauge does not fit
 If the gauge does not fit between the links, the
chain is worn and must be replaced. Contact
specialist dealer.
Figure 165: Gauge fits
176