Waeco ASC 6300 G Operating Manual page 31

14.4 Changing the dryer filter
1. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER
3. Skip the query requesting CAR DATA.
4. Select Rec/Recycling phase.
5. Set the Pressure increase Test time to
6. Press ENTER
7. Deselect Vacuum phase using
8. Press ENTER
9. Deselect Filling phase using
10. Press ENTER
11. Select Process start.
12. Press ENTER
The service hoses will now be drained and the A/C service unit's basic menu will be activated. The compressor
has produced a slight internal vacuum so that the filter can be replaced with minimal refrigerant loss.
13. Switch off the A/C service unit.
14. Pull out the power supply plug.
15. CAUTION! Health hazard
The following steps may only be performed by authorized personnel. Wear protective gloves and gog-
gles.
Unscrew the screw (D) from the holder, and pull the dryer filter straight out.
to confirm.
to confirm.
.
No
to confirm.
.
No
to confirm.
to confirm.
or to select Free selection.
.
1
EN
31