Waeco ASC 6300 G Operating Manual page 15

12.10 Inserting the containers for oil and UV additive
NOTICE! Damage hazard
Only use oils approved for the corresponding refrigerant. Observe the manufacturer's instructions.
The current supply quantities are displayed in the standby menu.
1. Open the cover flap (20) on the left side and push the containers into the snap locks:
• Container for fresh oil (17)
• Container for UV additive (18)
• Drained oil receptacle (19)
2. Close the cover flap (20).
3. Enter the container size for fresh oil and UV contrast agent
12.11 Entering the container size
Fresh oil and UV contrast agent can be kept in containers of 150 ml (A), 250 ml (B) or 500 ml(C) (accessories).
You must enter the size of the container in the A/C service unit.
(Entering the container size on page 15).
15
EN