Waeco ASC 6300 G Operating Manual page 14

EN
9. Press STOP again.
The standby menu is displayed.
12.8 Entering the date and time
Date and time are required for logging of the service procedures. The date and the time are printed along with the
company data on every service log.
1. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER
3. Use the cursor key
4. Press ENTER
5. Enter the password
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER
8. Press STOP .
The standby menu is displayed.
12.9 Editing default values
The A/C service unit has preset values for the most important service tasks. The default values appear
automatically when you select the respective menu.
You can alter the following default values if necessary:
Parameter
Pressure increase test time min.
Vacuum time min.
Leak test min.
PAG oil ml. (additional quantity)
UV tracer ml.
Filling Qt. g.
Display logo?
1. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER
3. Use the cursor key
4. Press ENTER
5. Enter the password
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER
8. Press STOP .
The standby menu is displayed.
14
to confirm.
to select Service.
to confirm.
.
8463
to confirm.
to confirm.
to select Service.
to confirm.
.
7388
to confirm.
or to select Other selections.
Default value
1
1
4
0
0
500
Yes
or to select Other selections.