Eu Declaration Of Conformity - E2S D1xB2X05-S Instruction Manual

Xenon beacons - sil2 for use in hazardous locations
Table of Contents

Advertisement

 
 
EU Declaration of Conformity 
 
 
 
 
Manufacturer:   
 
 
 
 
 
 
 
 
 
 
 
Authorised Representative: 
 
 
 
 
 
 
 
 
 
 
 
Equipment Type:  
 
Directive 2014/34/EU: Equipment and Protective Systems for use in Potentially Explosive Atmospheres (ATEX) 
Notified Body for EU type Examination (Module B): 
EU‐type Examination Certificate (Module B): 
Notified Body for Quality Assurance Notification / Conformity to EU‐type 
based on 
quality assurance of the production process (Module D): 
Quality Assurance Notification (Module D): 
Provisions fulfilled by the equipment: 
Standards applied: 
Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC)  
Standards applied: 
Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 
The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic 
equipment, including amendment by Directive 2015/863/EU.
Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) 
The product and all the components contained within it are free from substances of very high concern. 
Other Standards and Regulations 
EN 60529:1991 + A1:2000 + A2:2013. ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66/67 
 
On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment 
conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. 
 
This Declaration is issued under the sole responsibility of the manufacturer.
Martin Streetz 
Quality Assurance Manager 
 
E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com 
European Safety Systems Ltd. 
Impress House, Mansell Road, Acton 
London, W3 7QH 
United Kingdom 
E2S Warnsignaltechnik UG 
Charlottenstrasse 45‐51 
72764 Reutlingen 
Germany 
D1xB2X05, D1xB2X10, D1xB2X15, D1xB2X21, D1xB2LD2, D1xJ2 
 
 
 
 
UL International Demko A/S 
Notified Body No.: 0539 
Borupvang 5A, 2750 Ballerup, Denmark 
DEMKO 19 ATEX 2009X Rev. 1 
Sira Certification Service 
Notified Body No.: 2813 
CSA Group Netherlands B.V, Utrechtseweg 310, 6812 AR, Arnhem, Netherlands 
SIRA 05 ATEX M342 
II 2G Ex d IIC T6...T3 Gb 
II 2D Ex tb IIIC T95°C...T169°C Db  
EN 60079‐0:2018 
EN 60079‐1:2014 
EN 60079‐31:2014 
IP6X Dust Protection to EN60079‐0 / EN60079‐31 
EN IEC 61000‐6‐1:2019 & IEC 61000‐6‐1:2016 
EN IEC 61000‐6‐2:2019 & IEC 61000‐6‐2:2016 
EN IEC 61000‐6‐3:2021 & IEC 61000‐6‐3:2020 
EN IEC 61000‐6‐4:2019 & IEC 61000‐6‐4:2018 
 
Document No.: 
Date and Place of Issue: 
DC‐077_Issue_E 
London, 07/07/2022 
DC‐077_Issue_E ‐ Page 1 of 1 ‐ QAF_252_Issue_5
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D1xB2X05-S and is the answer not in the manual?

This manual is also suitable for:

D1xb2x10-sD1xb2x15-sD1xb2x10D1xb2x05

Table of Contents