Dell PowerProtect DM5500 Installation Manual page 47

Table 12. Data Manager Appliance Configuration UI error messages (continued)
Error code Error message
CONN0098 Backup network gateway
<backup_network_gateway_IP> is not
accessible.
CONN0100 Failed to validate the NTP server
<NTP_server_IP>.
CONN0110 Data network IP address <IP> is in use.
CONN0111 Management network IP address <IP> is in
use.
CONN0112 Data network IP addresses <IP_x> and
<IP_y> are in use.
CONN0115 IP addresses <IP_x> and <IP_y> are in use.
CONN0116 VLAN ID <VLAN_ID> is in use.
CONN0117 IP address <IP> is in use.
CONN0118 IP addresses <IP_x> and <IP_y> are not
in same subnet range of gateway IP address
<gateway_IP>.
CONN0119 IP addresses <IP_x> and <IP_y> are not in
same subnet range.
CONN0120 IP address <IP_x> not in same subnet range
of gateway IP address <IP_y>.
CONN0121 IP addresses <IP_x> and <IP_y> are not
in same subnet range of gateway IP address
<gateway_IP>.
CONN0122 IP addresses <IP_x> and <IP_y> are not in
same subnet range.
Troubleshooting steps
● If the issue persists, contact Dell Customer Support.
● Check details on the Configuration page.
● If appliance port is connected in access mode, use VLAN
ID 0.
● Check DM5500 switch configuration.
● Check firewall rules.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Check NTP server connectivity.
● Check firewall rules for UDP port 123.
● Use a valid NTP server.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use a data network IP address that is not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use a management network IP address that is not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use a data network IP addresses that are not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use IP addresses that are not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use a VLAN ID that is not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use an IP address that is not in use.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use the IP addresses that are in same subnet range of the
gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use the IP addresses that are in same subnet range.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use the IP address that is in the same subnet range of the
gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use the IP addresses that are in the same subnet range of
the gateway.
● Click Back and re-submit the configuration.
● If the issue persists, contact Dell Customer Support.
● Use the IP addresses that are in the same subnet range.
● Click Back and re-submit the configuration.
Troubleshooting 47