Chapter 5: Pre-Configuration Tasks - Dell PowerProtect DM5500 Installation Manual

Once you have installed the DM5500 in the rack, cabled the DM5500 to the switch(es), and verified the VLAN configuration,
you must perform the following pre-configuration tasks before logging in to the Data Manager Appliance Configuration UI to
configure the appliance.
Topics:
• Collect external network information
• Collect DM5500 serial number, NTP, and time zone information
• Power on the DM5500
•
Assign static IP address to the service computer for initial DM5500 login
Pre-configuration tasks
Pre-configuration tasks
5
37