Epson WorkForce WF-2930 Series User Manual page 166

Solving Problems
The paper path is smeared.
Solutions
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the
paper path.
"Cleaning the Paper Path for Ink Smears" on page 104
&
The paper is curled.
Solutions
Place the paper on a flat surface to check if it is curled. If it is, flatten it.
Copied Photos are Sticky
The copy was made on the wrong side of the photo paper.
Solutions
Make sure you are copying on the printable side. If you have accidentally copied on the wrong side of the
photo paper, you need to clean the paper path.
"Cleaning the Paper Path for Ink Smears" on page 104
&
Cannot Copy Without Margins
Borderless is not set in the print settings.
Solutions
Select Copy > More > Print Settings > Settings > Borderless Copy on the control panel. If you select a
paper that does not support borderless printing, you cannot enable borderless settings. Select a paper type
that supports borderless printing.
"Paper for Borderless Printing" on page 204
&
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
166
Copy Quality is Poor