Zonair3D AIR MOVE+ User Manual page 30

Air Move+ · Page 30
Instructions for fi tting the fi lters and closing the
purifi er
It is recommended to change the entire set of fi lters at once.
· Replace with a new set of original fi lters, placing them back in
the same position inside the device.
· Take into account the fl ow direction of the ULPA fi lter, marked
on the fi lter box.
Screw the fi lters fi rmly.
1
Next, replace the grilles, screwing them back to their original
2
position. And keeping in mind, that the grill pivot on one
side should match up and go into the location of the slots.
Finally, plug the purifi er back in and touch the middle
3
switch for 3 seconds to restart the device.
You will hear 2 consecutive beeps followed by another 2
consecutive beeps, thus verifying that the purifi er is ready.
para reiniciar su funcionamiento.
Please, contact Zonair3D
TM
replacements.
IMPORTANT: It is important that only original fi lters supplied
by Zonair3D are used to ensure the desired result and correct
TM
operation of the unit. The use of fi lters not supplied by the
manufacturer will render the warranty null and void.
or your local distributor for
Managment of used fi lters
The fi lters from this purifi er must be taken to your local green
point to be disposed of correctly, so that they can be managed
sustainably and do not create problems for the environment.
Disposal of old electrical appliances
European directive 2012/19/UE on Waste Electrical Equipment
(WEEE), specifi es that old household electrical appliances must not
be disposed of with the normal unsorted municipal waste.
The crossed out "wheeled bin" symbol reminds you of your
obligation to ispose of the appliance correctly.
Consumers must contact their local authorities or retailer for
information concerning the correct disposal of old appliances and/
or their batteries.