Beamage-M² User Manual
5.3.4. Manual Frames
In case you wish to add points at specific beam path lengths, write the distance (in millimeters) at which the
data must be taken and click the Add button. This can be done several times if needed. The arrow buttons
allow you to go quickly at one end or the other of the moving stage. These are useful when aligning the
laser.
You can find more details about manual measurements in section 6. M² Manual method.
5.3.5. Data
The Data box allows visualization and manipulation of the data.
Revision 6
Figure 5-27: Calculate M² button
Figure 5-28: Manual distance setting
Figure 5-29: Data Box
29