PRODUCT REGISTRATION Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed power protection, operation, and performance during the lifetime of the product. Please take a few minutes to register your product at: www.CyberPowerSystems.com/registration. Registration certifies your product’s warranty, confirms your ownership in the event of a product loss or theft, and entitles you to free technical support.
INSTALLING YOUR UPS SYSTEM UNPACKING 3. Plug the UPS into a 2-pole, 3-wire grounded receptacle (wall outlet). Make Inspect the UPS upon receipt. sure the wall branch outlet is protected The box should contain the following: by a fuse or circuit breaker and does not (a) UPS unit service equipment with large electrical (b) User’s manual...
BASIC OPERATION 1. Power On Switch 4. Full-Time Surge Protection Outlets To turn the UPS on, press the power button The unit has several surge suppression for approximately 2 seconds - you will hear outlets. a constant tone (1 second) - and release 5.
UPS on. Recharge the battery by leaving the UPS Battery not fully charged. plugged in. The UPS does not perform Contact CyberPower Systems about expected runtime. Battery is worn out. replacement batteries at: cyberpower- systems.com/support. The on/off switch is designed to prevent Turn the UPS off.
TECHNICAL SPECIFICATIONS Model XC625 Capacity 625 VA / 360 W Nominal Input Voltage 120 Vac Input Frequency 50 to 60 Hz +/- 3 Hz On-Battery Output Voltage 120 VAC +/- 5% On-Battery Output Frequency 50 Hz to 60 Hz +/- 1 % (auto-sensing) Max.