Table of Contents
Advertisement
2. Mind the cables connected to the fans. They must be unplugged before moving the
cover plate.
3. Put the protection plate (A), the screws and the washers (B) in a safe location as it will
be installed back later on.
It is not allowed to remove the connector plates (marked in the picture
below), nor to loosen their mountings.
Document: v0.4 / Document No.: TBA | Date: 11-08-2021
Removing the protection cover
WARNING
Location of the connector plates
HVC-R 100/150 E-Bus Charger Installation Guide
Page 91 of 131
Advertisement
Table of Contents
