Roland FS-1-WL Connection Manual page 4

Connecting the GS-1, FS-1-WL
and GS-1 Editor (iOS/Android)
at the same time
Connect the GS-1 and the FS-1-WL, and then
connect the GS-1 and the GS-1 Editor.
1.
Turn both the GS-1 and the FS-1-WL on, and place
them near each other.
2.
Press the [Bluetooth] button on the GS-1.
The unit enters pairing mode, and the Bluetooth
indicator on the GS-1 rapidly blinks blue.
3.
Press the [Bluetooth] (INSTRUMENT) button on
the FS-1-WL.
The Bluetooth indicator on the GS-1 blinks white,
and pairing begins.
The Bluetooth indicators on both units stop
blinking and remain lit when pairing is finished,
and now the GS-1 and FS-1-WL are paired.
4.
Press the [Bluetooth] button on the GS-1.
The Bluetooth indicator on the GS-1 rapidly
blinks blue.
4