ADT ADC-V523 Installation Manual page 21

|
7 Troubleshooting & FAQ's
LED Reference Guide
LED Colour/Pattern
LED Off
Solid Green
Blinking Green
Solid Red
Blinking Red
Blinking Blue
Blinking White
Blinking Green and Red
Led light can be programmed to be turned off after connected mode.
Status
Camera Status
Power Off
Connected to the
Internet
Local network
connection
Not Connected
Camera Booting
Wireless Enrolment
WPS Mode
Access Point Mode
Factory Reset
Factory Reset
21
Description
The camera is switched off
The camera has a local
network connection and
connected to ADT Interactive
Local Internet Connection
established but is not
connected to ADT Interactive
No connection to local
network or to the Internet
Power is on and Camera is
booting up
Connection made by holding
down the reset button
for about 3 seconds
Connection made by holding
down the reset button
for about 6 seconds
Camera is reverting to
factory default settings