ADT ADC-V523 Installation Manual page 10

|
4 Enrolling Your Camera on ADT Interactive
b) Add a new device:
If you have previously installed a different camera:
i.
ii.
iii.
3. The camera should have now been discovered by the network.
a) If no devices have been detected:
i. Click on 'Refresh Devices'
ii. Search by entering the 12-digit MAC address of your video device
(found on the video device label) and click on 'Find'
4. Once the camera has been discovered name the Video Device
5. Click on 'Install'
6. Click on 'Refresh Devices' again. The camera should now be listed under 'Video
Devices Installed'
Select 'Video'
Click on 'Settings'
Select 'Add Video Device'
to add the camera.
10