Connecting Cameras - Lorex SHS-2S7LD Series Instruction Manual

Camera Installation

Connecting Cameras

1. Connect the female end of the supplied 60' extension' cable to the camera.
NOTE: Confirm that the arrows on the DIN
Camera Cable and the DIN Extension
cable are pointed together when
connecting the cable. If the pins in the DIN
Cable are bent, the Camera will NOT
function.
2. Connect the RCA end of the supplied 60' extension cable to the corresponding colored cables
on the Camera Connector Cable.
3. Connect the Camera Connector Cable to CH1 or CH2 on the System.
60' Extension Cable Camera Connector System - Rear Ports
DIN to RCA Cable
14