Connecting Cameras - Lorex L17LD420 Series Instruction Manual

Camera Installation

Connecting Cameras

1. Connect the Female BNC end of the supplied 60' extension' cable to the camera. Connect the
male Power end of the extension cable to the camera.
* Camera may not be exactly as shown.
IMPORTANT NOTE: The ends of the extension cable are NOT the same - one end has a Male
power port, and the other has a Female power port. Before permanently running the Camera
Extension Cable, make sure that the cable has been oriented between the Camera and the unit
correctly
Male Power Port - The male power port
end of the Extension cable connects to
the Camera.
16
Female Power Port - The female power
port end of the Extension cable
connects to the System.