Lorex SHS-2S7LD Series Quick Setup Manual

Getting Started

The SHS System comes with the following components:
• 1 x 7" LCD Monitor
• 2 x Weather resistant Color Day/Night * IR Cameras with Stand
• 2 x 60' Extension Cables
• 1 x AV Cable
• 2 x Phone Jack RCA Cables
• 1 x Monitor Stand
• 1 x Wall Mounting Bracket
• 1 x Power Adapter
Check your package to confirm that you have received the
complete system, including all components shown above.
* IR illumination range up to 13ft. (4M) under ideal conditions. Objects at
or beyond this range may be partially or completely obscured depending on
the camera application. Picture changes from Color to B&W under low light
conditions.
** Not for use in direct exposure to water, rain or snow
A.

Connect Cameras

Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables.
Connect the DIN female end of the supplied 60'
1
extension cables to the cameras.
NOTE: Confirm that the arrows on the DIN Camera Cable and the
DIN Extension cable are aligned when connecting the cable. If the
pins in the DIN Cable are bent, the Camera will NOT function.
Hand Tools
Time Tools
utes*
Under 30 Min
Hand Tools
* Installation time may vary based on
application and camera cabling
Skill Level
7" LCD ViDeO SUrVeiLLanCe SySTem
wiTH 2 Day/niGHT * inDOOr/OUTDOOr ** CameraS
easy
7" LCD Monitor with 2 Cameras
Monitor Stand
60' Extension Cables
AV Cable
Wall Mount Bracket
Phone Jack RCA Cables
Connect the other end of the extension cables to
2
the short phone jack RCA Cables.
Skill Level
Hardware
Hi Speed
Skills - easy
Router
Plug & Play connectors, On
easy Intermediate advanced
screen set up
Intermediate advanced
Connect the short phone jack
3
RCA Cable to the bottom of the
monitor.
Power Adapter
B.

Connectivity Diagram

7" LCD Monitor
3
4
Power Adapter
Connect one end of the power adaptor to the
4
power outlet and the other end to the monitor
Monitor Bottom
2 x 60' Extension Cables
2
Phone Jack RCA Cables
1
2 x Cameras
QSG_EN_R1