Changing The Factory Set Point; Changing The Temperature Scale Between Celsius (°C) And Fahrenheit (°F) - Thermo Scientific ES Series User Manual

Changing the Factory Set point

(The set point is the point at which the Freezer normally holds the temperature at; in rare circumstances such as high/low
room temperatures it may be necessary to adjust this slightly.
Changing the factory setting is not recommended).
Function
To change the set
point
Followed by
Followed by
Followed by
Followed by
Followed by
Note: Set point can be increased or decreased in +/- 0.1°C increments by a MAXIMUM of 2°C
Table 5. Factory Set Point
Changing the temperature scale between Celsius (°C) and
Fahrenheit (°F)
To change temperature scale
Followed by
To display current temperature scale
(default is Celsius)
To change to Fahrenheit
To confirm change to Fahrenheit
To return to temperature display
Press for 1 second
Table 6. Temperature Scale
ES Series Lab Freezer
Press
(Increase/Decrease)
Function
Hold button (s) down for
3 seconds
Once
1 second
up to 20 times
1 second
5 seconds
Press
Example screen
Display message
12