Connecting A Slave (Spot-Out) Monitor - Appendix #3 - Lorex L17LD420 Series Instruction Manual

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connecting a Slave (Spot-Out) Monitor - Appendix #3
Connections to a Slave Monitor / Spot-Out Monitor (not included with the System) can be made
through the VIDEO OUT and/or the SPOT OUT ports on the back of the Observation System. A
slave monitor can be a TV or Computer Monitor with VGA inputs.
A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as
it is sent from the Observation System (based on settings in the Spot Out Menu options).
• VIDEO OUT - Connect the VIDEO OUT port on the back of the Observation System to the
VIDEO IN port on the back of the Slave Monitor. This will output all onscreen video to a
secondary monitor.
• SPOT OUT - Connect the SPOT OUT port on the back of the Observation System to the
VIDEO IN port on the back of the Slave Monitor
NOTE: The Video OUT and Slave out can be used at the same time, however separate
monitors will need to be used.
48
OBSERVATION SYSTEM
VIDEO OUT
SLAVE MONITOR
(Not Included)
SPOT OUT