Remote Control - Lorex L17LD420 Series Instruction Manual

Remote Control

Remote Control
Listed below is the new Remote Control. All Buttons described above function the same as the
Front Panel buttons.
1. MODE - Changes the view to 4-Channel
Split Screen.
2. ZOOM - Zooms in on the image (must
be in full screen mode).
3. FREEZE - Freeze the image on the
current full screen channel.
4. SEQUENCE - Start Sequence mode.
5. MENU - Press to access the System
Menu.
6. RECORD - Starts manual recording on
the DVR.
7. + BUTTON - Increases values and
System Volume.
8. NAVIGATION / OK - Press the???? to
navigate in Menus, and control PTZ
cameras. Press OK to accept an option
in Menu mode.
9. CH +/- BUTTONS - Press the Channel
+/- buttons to switch between channels.
10. SEARCH - Opens the Search menu
11. PLAYBACK CONTROLS - Use to
control the playback (fast forward,
reverse, play, pause).
12. PTZ - Opens the Pan/Tilt/Zoom
controls (only used with PTZ Cameras,
not included).
13. <not used>
14. NUMBER KEYPAD - Used to switch
between channels, and change
numeric values in the Menu.
15. FUNCTION - Enter the Setup Menu.
16. PIP - Display channels in Picture in
Picture view
17. AUDIO - Mutes the Audio (if using an
Audio enabled Camera or Microphone)
18. - BUTTON - Decreases values and
System Volume.
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18