Connecting A Slave (Spot-Out) Monitor - Appendix #3 - Lorex L19LD1600 Series Instruction Manual

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connecting a Slave (Spot-Out) Monitor - Appendix #3
Connections to a Slave Monitor / Spot-Out Monitor (not included with the System) can be made
through the MONITOR OUT and/or the SPOT OUT ports on the back of the Observation System.
A slave monitor can be a TV or Observation System Monitor.
A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as
it is sent from the Observation System (based on settings in the Spot Out Menu options).
• MONITOR OUT - Connect the MONITOR OUT port on the back of the Observation System
to the VIDEO IN port on the back of the Slave Monitor. This will output all onscreen video to
a secondary monitor.
• SPOT OUT - Connect the SPOT OUT port on the back of the Observation System to the
VIDEO IN port on the back of the Slave Monitor
NOTE: The Video OUT and Slave out can be used at the same time, however separate
monitors will need to be used.
SLAVE MONITOR
(Not Included)
48
OBSERVATION SYSTEM
SPOT OUT
MONITOR
(Not Included)