Connecting A Slave (Spot-Out) Monitor - Appendix #4 - Lorex L15LD400 series Instruction Manual

15" lcd color observation system with built-in 4 channel triplex digital video recorder and 4 night vision ccd cameras

Hide thumbs Also See for L15LD400 series:

Table of Contents

Connecting a Slave (Spot-Out) Monitor - Appendix #4

Connections to a Slave Monitor / Spot-Out Monitor (not included with the System) can be made

through the VIDEO OUT and/or the SPOT OUT ports on the back of the Observation System. A

slave monitor can be a TV or Computer Monitor with VGA inputs.

A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as

it is sent from the Observation System (based on settings in the Spot Out Menu options).

• VIDEO OUT - Connect the VIDEO OUT port on the back of the Observation System to the

VIDEO IN port on the back of the Slave Monitor. This will output all onscreen video to a

secondary monitor.

• SPOT OUT - Connect the SPOT OUT port on the back of the Observation System to the

VIDEO IN port on the back of the Slave Monitor

NOTE: The Video OUT and Slave out can be used at the same time, however separate

monitors will need to be used.

OBSERVATION SYSTEM

VIDEO OUT

SLAVE MONITOR

(Not Included)

SPOT OUT

Table of Contents