Tcp/Ip Setup - Speed; Pan/Tilt Setup - Command Setup - Lorex L17LD420 Series Instruction Manual

Configuration
[DOMAIN]
Enter the Domain Name used when registering the
DDNS (only the first part is needed, not the lorexdd-
ns.net part).
[USER NAME]
Enter the User Name set when configuring the DD-
NS.
[PASSWORD]
Enter the Password set when configuring the DDNS.
[DDNS STATUS]
Displays a REGISTERED message once the DDNS
has been configured, and the Register button has
been clicked.

TCP/IP SETUP - SPEED

Controls the system bandwidth use (network
speed). Settings between 1 (low) ~ 9 (high)

PAN/TILT SETUP - COMMAND SETUP

[CHANNEL]
Select video channel.
[MODEL]
Select PTZ protocol.
[PTZ ID]
PTZ ID setup.
[BUADRATE]
Baud Rate setup for the connected PTZ camera.
[CMD DELAY]
Set up the delay time to run the command.
[COMMAND]
Display the COMMAND name
(Click to change COMMAND)
[LENGTH]
Display the code length for the selected COMMAND.
[CODE]
Display the code for the selected COMMAND.
38