Advertisement
Quick Links
I-7019R, M-7019R Quick Start Guide
Warranty
All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date
of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves the right to change this
manual at any time without notification. The information furnished by ICP DAS is believed to be accurate and reliable.
However, no responsibility is assumed by ICP DAS for its use, or for any infringements of patents or other rights of third
parties resulting from its use.
Packing List
I-7019R or M-7019R
Internal I/O Structure
Wire Connections
Plastic Rail
Pin Assignments
CD
Quick Start Guide
Page 1
Advertisement
Related Manuals for ICP DAS USA I-7019R
Summary of Contents for ICP DAS USA I-7019R
- Page 1 I-7019R, M-7019R Quick Start Guide Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date of delivery to the original purchaser. Warning ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves the right to change this manual at any time without notification.
- Page 2 Modbus Table (M-7019R only) Address Description Address Description 10129 ~ Over/under range status of channel 0 40488 Modbus response delay time in ms, 10136 to 7 valid range: 0 ~ 30 00129 ~ 40489 Host watchdog timeout value, 0 ~ 00136 255, in 0.1s 30001 ~...
- Page 3 Module test and configuration Step 1: INIT switch Operation Step 2: Install & Run DCON Utility 1. Please Install DCON Utility first You can find the software in the CD. CD path: <Driver>:\napdos\driver\dcon_utility\ Web link: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/ 2. Run DCON utility 1.
- Page 4 Please download the last version from: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/ Q3. What is individual channel configuration? I-7019R/M-7019R provides the “individual channel configuration”. “Individual channel configuration” means the different settings of the input ranges for each channel. You can configure the modules by DCON utility Q4.